Allen
Model 640RR Bike Rack
English Instructions
Page 2.
G.
Loading bicycles onto rack:
1. Remove all loose items from bikes (pumps, bags, etc.) and check that all quick-release hubs are tight.
Never carry more than 4 bikes (max. capacity: 140 lb.). Car tail lights must remain visible.
2. Load first bike with its chain and gears facing away from rack. Make sure that bikes do not
come into contact with car (rotate inside pedal if necessary).
3. Load subsequent bikes in alternating directions. For best weight distribution, load heaviest
bikes first with lighter bikes on outside. Add padding between bike contact points, if necessary.
4. After bikes are loaded, check that entire rack is secure and that No-Wobble Bolt is tight, making
sure that rack is still firmly in place. Vision out of rear window may be restricted - use side
mirrors accordingly, especially when backing up.
R. A. Allen Co., Inc.
P. O. Box 221
Lincoln, MA 01773
U. S. Patents 4518108, 4709840, 5361959 - Foreign & Other Patents Pending
© 2001 R. A. Allen Co., Inc., All Rights Reserved
www.allenracks.com
Tel: (800) 722-5536
Fax: (781) 259-4116
H.
Securing bikes to rack:
All bikes must be securely tied to rack. Use individual bike tie-down straps or additional straps if necessary.
Installing Rack on Vehicle:
B.
1. With arms in the folded position, insert rack into receiver
hitch. Line up hole in base with hole of receiver hitch.
640RR should only be used on 2”
Receiver Hitches
No-Wobble Bolt
1/2” Nylon Insert Nut
2. Insert No-Wobble Bolt into hole, making sure that the
shoulder of the bolt comes up against receiver rack inside of
hitch. Tighten firmly with 2 - 3/4” wrenches. There should not
be any movement of the rack inside of the hitch when done.
Folding up Arms:
C.
Pop-up Pin
To fold up arms, pull out Pop-up Pin and swing carry arms into
an upright position.
IMPORTANT: Pop-up Pin must be
fully engaged when arms and rack
are in an upright position.
If Pop-up Pin does not properly engage,
call Allen Racks at (800) 722-5536
WRONG
R IGHT
Place one carry arm under
front top tube. With other
carry arm, rotate tie-down
cradle and place carry arm
behind seat tube and
below rear down stay.
WOMEN’S FRAMES
1. Place bikes in tie-down
cradles.
3. Pull tight.
2. Thread straps.
4. Use 70” Strap to secure all
of the bikes together around
bottom brackets.
(10 pages)
(2 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals